All Collections
Fingerprint reader
Fingerprint device firmware update
Fingerprint device firmware update

Instructions on how to update firmware on devices

Yulia Puplaka avatar
Written by Yulia Puplaka
Updated over a week ago

To update the firmware, the following steps must be performed on the device:

  1. Press "MENU" on the device keyboard

  2. Enter the password "53178" and press "OK"

  3. Scroll down until you see "SYSTEM MANAGE" and press "OK"

  4. Then scroll down until "FIRMWARE UPGRADE" appears and press "OK"

  5. If the device asks "UPDATE FIRMWARE?", be sure to select "YES" and
    then press "OK"

  6. Wait until the software is updated (the charging bar on the device's screen reaches 100%), and then the device restarts

  7. To check the updated firmware, press "MENU" again on the keyboard

  8. Enter the password "53178" and press "OK"

  9. Scroll down until you see "SYSTEM MANAGE" and press "OK"

  10. Scroll down until you get to "FIRMWARE VERSION" and make sure it says "FP-RW-1000 v2.8"

Did this answer your question?