Skip to main content
All CollectionsFingerprint readerManaging fingerprints and smart cards
Adding fingerprints and RFID cards to the employee in the device
Adding fingerprints and RFID cards to the employee in the device

Adding fingerprints and RFID cards to the employee in the device

Yulia Puplaka avatar
Written by Yulia Puplaka
Updated over a week ago

In order for a new employee to start recording their working time, they must first read their fingerprints or RFID-card in from the device 😊

To enrol employee’s fingerprint for the first time:

  1. Show to the employee, how to place finger to the sensor edge, bend finger tip and press finger tip to the sensor. Let the employee try it, so the employee could feel the sensitivity of the sensor and you can make sure that employee understands how to do it correctly;

  2. Press the „Menu“ button ;

  3. Insert code 53178;

  4. Press 1x button „OK

  5. Choose „"User Management" by pressing 1x button "OK";

  6. Choose „Add Fingerprint" by pressing 1x button "OK";

  7. Employee must press 3x with the same finger to the sensor;

  8. Write down fingerprint order number and to who it belongs, what appeared on the
    fingerprint reader screen;

  9. Press 1x button „OK“;

  10. To continue enrolling fingerprints choose „YES“ by pressing 1x button „OK“;

  11. To leave menu, press 3x button „ESC“.

To enrol employee’s RFID-card for the first time:

  1. Press „Menu“ button ;

  2. Insert code 53178;

  3. Press 1x „OK“ button ;

  4. Choose „"User Management" by pressing 1x "OK" button ;

  5. Choose „Add Card " by pressing 1x lower arrow button and then press 1x "OK" button ;

  6. Place RFID-card to the right bottom corner of fingerprint reader;

  7. Write down RFID-card order number and to who it belongs, what appeared on the
    fingerprint reader screen;

  8. Press 1x „OK“ button ;

  9. To continue enrolling RFID-cards choose „YES“ by pressing 1x button „OK“;

  10. To leave menu, press 3x „ESC“ button .

Did this answer your question?